‏إظهار الرسائل ذات التسميات Mirai. إظهار كافة الرسائل
‏إظهار الرسائل ذات التسميات Mirai. إظهار كافة الرسائل

BrickerBot- A New Mirai-Like Malware Targeting Insecure Internet of Things (IoT) Devices

If you're an IoT device owner, our advice to you would be to get the security of all your internet-connected devices in line as soon as possible. The urgent warning is being issued because a new threat called 'BrickerBot' has recently been discovered that is allegedly targeting insecure Internet of Things (IoT) devices.

What is interesting about BrickerBot malware is the fact that instead of harnessing the IoT devices to a distributed denial of service (DDoS) network, it only threatens to permanently brick them instead. This is the reason that IoT experts are still contemplating if the malware is malicious in intent, or it has just been created to take down known vulnerable devices off the internet so that they don't pose any threat in the future. The authors of BrickerBot are currently unknown.

The malware was recently detected on DDoS protection company Radware maintained honeypot servers. The type of attack have been described as a "permanent denial-of-service" (PDoS).

According to a threat advisory issued by Radware, over a four-day period, their honeypot had detected 1,895 PDoS attempts performed from several locations around the world. It also said that the sole purpose of these attacks was to compromise IoT devices and corrupt their storage.

The company has also claimed that they had detected two distinct, different waves of what it has named BrickerBot from different bot-nets. According to the company, the second one was concealed by Tor egress nodes.

Giving out details, Radware said that the BrickerBot PDoS attack made use of Telnet brute force- the same exploit vector used by the Mirai last year to plague internet-connected devices in over 177 countries- to breach a user's insecure IoT device. The company further revealed since Bricker does not try to download a binary, so it unfortunately does not have a complete list of credentials that were used for the brute force attempt. However, they were still successful in recording first attempted username/password pair, which was consistently 'root'/'vizxv'."

Even IoT devices that boost of having hard-wired credentials could become victims to such a targeted attack.

Radware further explained in detail what all did the malware do once successfully accessing a device. After gaining access, the PDoS bot would immediately perform a series of Linux commands that would lead to corrupted storage, followed by commands to disrupt device performance, Internet connectivity, and wipe-off of all files present on the device.

Among the special devices targeted by the malware are, MultiMediaCard, which is a special device type that matches memory card standard, a solid-state storage medium, and Memory Technology Device, which is a special device type to match flash characteristics.

According to Radware researchers, the version of BrickerBot picked up by its honeypot servers is targeted at Linux/BusyBox IoT devices that have their Telnet ports open and publicly exposed to the internet, which is similar to devices that were targeted by Mirai in October.

So, IoT device owners, get your devices in orders as soon as possible because it always "better to be safe than sorry."

BrickerBot- A New Mirai-Like Malware Targeting Insecure Internet of Things (IoT) Devices

If you're an IoT device owner, our advice to you would be to get the security of all your internet-connected devices in line as soon as possible. The urgent warning is being issued because a new threat called 'BrickerBot' has recently been discovered that is allegedly targeting insecure Internet of Things (IoT) devices.

What is interesting about BrickerBot malware is the fact that instead of harnessing the IoT devices to a distributed denial of service (DDoS) network, it only threatens to permanently brick them instead. This is the reason that IoT experts are still contemplating if the malware is malicious in intent, or it has just been created to take down known vulnerable devices off the internet so that they don't pose any threat in the future. The authors of BrickerBot are currently unknown.

The malware was recently detected on DDoS protection company Radware maintained honeypot servers. The type of attack have been described as a "permanent denial-of-service" (PDoS).

According to a threat advisory issued by Radware, over a four-day period, their honeypot had detected 1,895 PDoS attempts performed from several locations around the world. It also said that the sole purpose of these attacks was to compromise IoT devices and corrupt their storage.

The company has also claimed that they had detected two distinct, different waves of what it has named BrickerBot from different bot-nets. According to the company, the second one was concealed by Tor egress nodes.

Giving out details, Radware said that the BrickerBot PDoS attack made use of Telnet brute force- the same exploit vector used by the Mirai last year to plague internet-connected devices in over 177 countries- to breach a user's insecure IoT device. The company further revealed since Bricker does not try to download a binary, so it unfortunately does not have a complete list of credentials that were used for the brute force attempt. However, they were still successful in recording first attempted username/password pair, which was consistently 'root'/'vizxv'."

Even IoT devices that boost of having hard-wired credentials could become victims to such a targeted attack.

Radware further explained in detail what all did the malware do once successfully accessing a device. After gaining access, the PDoS bot would immediately perform a series of Linux commands that would lead to corrupted storage, followed by commands to disrupt device performance, Internet connectivity, and wipe-off of all files present on the device.

Among the special devices targeted by the malware are, MultiMediaCard, which is a special device type that matches memory card standard, a solid-state storage medium, and Memory Technology Device, which is a special device type to match flash characteristics.

According to Radware researchers, the version of BrickerBot picked up by its honeypot servers is targeted at Linux/BusyBox IoT devices that have their Telnet ports open and publicly exposed to the internet, which is similar to devices that were targeted by Mirai in October.

So, IoT device owners, get your devices in orders as soon as possible because it always "better to be safe than sorry."

Indian Scientists From IIT Develops Technology for Securing Internet of Things

The progress trajectory of the world of Internet of Things (IoT) hit a big roadblock last year when Mirai — a malware that caused one of the worst denial of service cyberattacks the world had witnessed in the last few years, took centerstage. This particular incident caused several people dissing the technology and its developers for not dedicating enough attention on the security of their products and the privacy of their users and thus in the process making several people vulnerable to theft of their personal/private information.

A while back, we even reported about how this whole discourse around IoT and security had tempted Andrew McGill, a reporter from The Atlantic newspaper to design and carry out an experiment to find out the current status of IoT security and how the result of the experiment shocked everyone in the IoT world and the real world completely.

His experiment involved him building a virtual Internet-connected toaster, and then putting it online and waiting to see how much time does it take for the hackers to attempt to breach it. And, what he found out wasn't something that even the IoT experts that he had spoken to while designing the experiment had predicted. He found out that hacking Internet of Things is actually a Child’s Play For Hackers as contrary to what he thought would take hackers a week to breach, took them only 41 minutes.

It is not that nothing is being done in the space to lift it from the dark dungeon that it has fallen into because of last year's Mirai controversy, but the process is a little slow. In fact, in the light of the current scenario around IoT, the 2010 founded Broadband Internet Technical Advisory Group or the BITAG- an alliance formed by world technology giants Microsoft, Google, Verizon, Intel and a number of other players in the tech industry- has even laid out a set of guidelines so as to improve the security on Internet of Things devices.

While the world tech leaders only issued guidelines for IoT, a team of scientists at Indian Institute of Technology Kharagpur actually went ahead and successfully built 'Physically Unclonable Functions' (PUF) for securing unencrypted networks.

PUFs are basically fingerprint generator circuits for electronic objects which uniquely identify each object, and help in authenticating the commands sent to connected IoT devices. The receiving device have the responsibility of reading the command, verifying the authenticity of the sender and then operate accordingly. The PUF, which consumes very less power and is extremely light in weight, aims to ensure security protocol for device authentication, light-weight key exchange and secure communication.

While the research and the PUF is being highly appreciated worldwide, let's see if it is successful in helping the IoT win back the trust of its users and get back its secure tag.

Google, Microsoft and Others Create Guidelines For Improving IoT Security

While IoT keeps climbing the popularity charts, the other thing which is growing at almost twice the pace along with it is the security concern associated with it.

Nowadays, personal computers are no more the only devices connected to the internet. A variety of devices embedded with Internet connectivity and functions have also joined the party. This very class of devices, famously known as the Internet of Things or IoT, and has ended up giving birth to a new level of security and privacy risks.

In order to curb these, the Broadband Internet Technical Advisory Group or the BITAG- an alliance formed by world technology giants Microsoft, Google, Verizon, Intel and a number of other players in the tech industry- has laid out a set of guidelines so as to improve the security on Internet of Things devices.

Formed in the year 2010 to produce best practices for broadband security, the BITAG published its recommendations for IoT manufacturers in a report titled Internet of Things (IoT) Security and Privacy Recommendations. The Report explores in detail the technical aspects of the security and privacy of networked consumer devices.

In the 8-pages long document, the BITAG mentions that “the nature of consumer IoT is unique because it can involve non-technical or uninterested consumers; challenging device discovery and inventory on consumer home networks.” It further added that IoT devices can be hijacked to create “Distributed Denial of Service (DDoS) attacks, perform surveillance and monitoring, gain unauthorized access or control, induce device or system failures, and disturb or harass authorized users or device owners.”

This is exactly what happened in the case of Mirai, the malware that is responsible for causing one of the worst denial of service cyberattacks that the world had experienced in the last few years. Recently the malware had spread and infected internet-connected devices in over 177 countries all around the world.

In October, Mirai caused massive outrage when it targeted Dyn, a major name in the domain name service (DNS) provider sector. The case saw Internet of Things being put to use to break the internet.

In order to avoid such cases in the future, the Broadband Internet Technical Advisory Group made a number of recommendations for the manufacturers:

1) IoT Devices should make use of the best current software practices. This should include a strong mechanism for secure, automated software updates.

2) IoT Devices should use strong authentication by default and not use common or easily guessable user names and passwords (e.g., “admin”, “password”).

3) IoT Devices manufacturers should follow best security and Cryptography practices by securing communications using Transport Layer Security (TLS) or Lightweight Cryptography (LWC). If devices rely on a public key infrastructure (PKI), then an authorized entity must be able to revoke certificates when they become compromised, and manufacturers should take care to avoid encryption methods, protocols, and key sizes with known weaknesses.

4) IoT Devices should be restrictive rather than permissive in communication.

5) IoT Devices should continue to function even if the internet connectivity is disrupted.

6) IoT Devices should continue to function even if the cloud back-end fails

7) IoT Devices should ship with a privacy policy that is easy to find and understand.

BITAG is a non-profit, multi-stakeholder organization that is focused on bringing together engineers and technologists in a Technical Working Group (TWG) to develop consensus on broadband network management practices and other related technical issues that can affect users’ Internet experience, including the impact to and from applications, content and devices that utilize the Internet.

The report has also recommended that IoT devices manufacture should make sure that the devices are not reachable via inbound connections by default. Since BITAG is just an advisory group, it can’t legally enforce any of its recommendations on IoT device manufacturers, but can only give them crucial points to think on and act.

The lead editors of the report were Jason Livingood, Vice President - Technology Policy & Standards at Comcast and Nick Feamster, Professor of Computer Science at Princeton University. Douglas Sicker, Executive Director of BITAG, Chair of BITAG’s Technical Working Group, Department Head of Engineering and Public Policy and a professor of Computer Science at Carnegie Mellon University, chaired the review itself.

[Top Image: logicworks.net]

This Anti-Mirai Tool Makes Your IoT Device Hack Proof

In October, we reported a story about how IoT device owners all around the world needed to be beware of Mirai, the malware, that had single-handedly been responsible for causing one of the worst distributed denial of service (DDoS) cyberattacks that the world had experienced in the last few years, and how it had now managed to spread and infect internet-connected devices in over 177 countries all around the world.

Mirai is so powerful a malware that it had successfully managed to take down Spotify, Twitter, and a number of other so-called high security websites. And since October, there has been no stopping Mirai's growing pace. But now, a new security tool has been developed that has the potential of letting IoT devices owners know if their devices are vulnerable to Mirai's vicious attack.

In the past, the malware has been used in distributed denial of service (DDoS) attacks. Mirai is basically works by scouting for insecure Internet of Things devices, and once that is done, it uses them as bot-nets to do its bidding. And since the malware’s source code has already been leaked, it can used by basically anyone to use/misuse.

Mirai was successful in causing massive outrage in October when it targeted Dyn, a major name in the domain name service (DNS) provider sector. The case saw Internet of Things being put to use to break the internet.

Seeing the havoc that Mirai had managed to achieve and was still causing, Imperva decided to do something about the situation and was successful in determining a way to know if the IoT devices were vulnerable to malwares like Mirai. The best thing is, one doesn't have to buy or install anything to use it -- all that one has to do is to visit the scanner website on the device that you want to check. The scanner then comes to action and analyses the IP address, smart products details used for internet access.

This is how the Mirai scanner works:

this-is-how-the-scanner-works

1) Initiate a scan request.
2) Once scan request is initiated, the scanner comes to action and looks for connected devices on ports 22/23.
3) The third step involves the scanner testing if a device can be accessed with passwords from Mirai's dictionary.
4) The scan results are finally furnished.

The main issue here is that the scanner can’t do much about the affected devices themselves. If during a scan, one of your connected devices comes out to be vulnerable to Mirai, an immediate step that you should take is change its login credentials from the ones set by the manufacturer by default. If somehow that isn’t possible, or if you don’t know how to do it on your own, you will have to make a quick decision on whether you intend to put your device at risk or just simply stop using it altogether.

Malware like Mirai are the reason that security experts all around the world fear the growing popularity of the Internet of Things.

Read More - https://www.incapsula.com/blog/mirai-scanner-unwitting-mirai-botnet-recruit.html

[Top Image - Shutterstock]

This IoT Virus Bot Has Infected Devices In Over 177 Countries and Growing

IoT device owners all around the world, beware of Mirai -- a malware that had been responsible for causing one of the worst denial of service cyberattacks that the world had experienced in the last few years, has now spread and infected internet-connected devices in over 177 countries all around the world.

mirai_map

The beginning of October saw a cybercriminal releasing Mirai's source code. The release of the malware's code ended up giving even the cybercriminals with minimal skills and talent a new tool to launch vicious cyberattacks. The good thing was, that it also resulted in giving security researchers and internet defenders a way of tracking down the activities of the bad guys and keep a close tab on their armies of hacked devices.

United States, India, Serbia, China, Brazil, Russia, Pakistan: the list of affected countries goes on and on, as this capture of the map shows.

The malware that powered one of the worst-ever zombie armies, or botnet, made of IoT is being closely investigated by Imperva, a company with a solid reputation of providing websites protection against Distributed Denial of Service (DDoS) attacks. Along with Imperva, a number of other firms are also investigating the malware.

Here is an 18 minute recording from our Mirai monitoring network at 5x speed -



According to Imperva's latest tally, the botnet made of Mirai-infected devices has now managed to reach a total of 164 countries. On the other hand, a pseudonymous researcher who is known by the name MalwareTech has also been closely mapping the malware and has predicted Mirai's the total tally to be an even higher 177 countries.

Last month, Mirai was used to build a botnet that attacked security journalist Brian Krebs' website with a large DDoS attack. A hacker by the name Anna-senpai had revealed the source code of the malware at the beginning of the month, but who is really behind the release is not clear yet.

While experts have termed Mirai as a clumsily written piece of malware, it is spreading quickly mainly because it targets IoT devices that are comparatively easy to hack than others as these devices normally use default and very predictable passwords, such as “123456”, “admin”, “root” and “password" etc.

[Top Image - Shutterstock]

Market Reports

Market Report & Surveys
IndianWeb2.com © all rights reserved